| JHP Slipper Clutch end gap
After having done about 100 miles now on the 998 Hybrid I had had enough of the dragging clutch that was making down changes a bit rough and was nigh on impossible to get into neutral with the motor running.
Easy Solution was to fit the JHP slipper clutch I had picked up 2nd hand.
The 998 clutch that I removed had very few signs of use, so I decided to fit its sintered plates into the JHP clutch.
I have ridden the bike and all appears to be OK, clutch pressure feels lighter maybe slightly weaker springs on the JHP unit.
What I would like to know is the end gap that JHP recommend. I can always try phoning later but thought I would try here first |