Quote:
Originally posted by Harv748
So if the regulator is/could be OK, what was the actual cause of the problem? The wiring, bad connector(s) block??? |
Hello
Harv748 I had the same problem, and as Shazaam states replace the wires with higher gauge, got mine in Mapplins, I replaced the wire to the regulator, but not yet all the way through to the alternator, but intend to.
Also used bullit connectors, and heat shrink.
I was also worried I may have damaged the regulator, but I found my wires were burnt out at the connection block, which I have cut out.
I would say you should be ok though. If you need any wire, connectors etc, let me know.
regards
TopiToo