Ducati Sporting Club UK - View Single Post

aka.eric · 11-Jun-2005, 19:05

Set the sag to 10mm by increasing pre-load on spring.Attach R.H.T,back wheel hanging measurement top of nut,top of tool=239mm+21mm axel centre = 260mm.Is there enough adjustment left on the tie-rod to get down to 245mm?.Or have I got this wrong.

11-Jun-2005, 19:05	#21
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Set the sag to 10mm by increasing pre-load on spring.Attach R.H.T,back wheel hanging measurement top of nut,top of tool=239mm+21mm axel centre = 260mm.Is there enough adjustment left on the tie-rod to get down to 245mm?.Or have I got this wrong. Reply