Right just spoke to K-Tech, very nice guys just to see if they can shed some light on things, they gave me some base settings for the front end
28mm static sag
Comp - 6 to 8 clicks out
Rebound - 14 clicks out
Think I'll take a note of what I have got and give it a go. A few questions though static sag? I'm guessing I need to lift the front of the bike off the ground measure the length of fork leg exposed, drop again and re-measure? and then adjust via preload (blue nut - technical eh?)
Gizmo, I kind of got half of what you said, then it went blah, blah, blah
As for a description well tip in 2nd gear probably doing 60-70mph knee down, and the front feels like it's skipping mid corner (off camber part) the surface was bumpy (F1 cars) and the bike seemed to drift outwards and I'm not sure whether or not I was on the wrong line, so on the wrong (bumpy) bit of the track to try and get on the gas earlier, I tried several differing lines trying to square the corner off a bit, and making the exit come to me, but nothing seem to help the feel.