Quote:
Originally posted by andyb
Well, leave the steering head angle alone. The forks come through the yolks to give a measurement of 186mm from the bottom edge of the tube to the bottom of the bottom yolk.
On the rear using the datum tool, which was confirmed to me the 998 one is the same as the 999...... a measurement of 250mm from centre of spindle to top edge of tool.
Mine was set at 230......... |
do you know how long your tie bar is?? I recon the extra 3mm I run adds about 8 - 9 to the actual ride height but its beyond where the threads are meant to insert to in the rod.
i'll jack bike up tonight and measure fork tube/crown