Quote:
Originally posted by andyb
I certainly looked to me as though it was parallel. Measuring my 250mm i could move along the datum tool and it remained the same.
I took my tie rod off to undo the nuts, put it back on again to do the adjusting and locked them in place. I could give you an estimation of its length hole to hole as on the 285mm. |
hum, i cant see how it cn be constant, the tool fixes to swingarm pivot on frame and increasing tie rod length should lift frame away from swingarm and alter angle tool sits to swingarm, never actually seen one so this might not be the case though
did 285 equate to 250 ride height or 230??