Quote:
Originally posted by andyb
A guestimate of 285 as its difficult to measure, made the 250.
There is a very slight taper, that equates to a couple of mm over a distance of 10 cms. |
measuring it was why i made the tool thing
if its 285 = 250 then thats same as Section 8, you can try adjusting tie bar 1 whole turn and see what happens at axle end, 1 turn should be 1.5mm which i think is about 3- 4mm on the datum tool.
wonder if swingarm is same length 04/05 ??