| Hi , Paul Trust you are well bronzed and getting the miles in. Or maybe you were until now. Silly things like trying to bleed it with the Pressure bottle cap on , running engine with cap off if possible You may realize im no ST Mech just thinking with me Plumbing hat on. Loosening hoses and seeing if fluid is there then chasing it higher up the system. Make up some thing that will force the air out like a hose from a outside tap then connecting to the top hose of the radiator . Never an easy way with bikes and having good knowledge of the arsing about that it takes to remove an ST's fairing not a 5 minute job. Knowing this lot here Im sure some one will give you a few tips hopefully. Nice to see you mate Regards 4D |