Quote:
Originally posted by andyb
You leave the cpu on the bike and attatch the pc111 as well.
The pc111 sort of interupts the working of the std cpu and can be adjusted to fule where you want.
I understand that with the correct equipment a std cpu could also be adjusted to where you want it to be. |
Oh i have two spare cpu, did have 3 but Henners had one. If you wanted to keep your std set up cpu, and wanted another for your open pipes setup, then you could try one of mine.
One is damaged, but only to the plastic around the connector casing, this was from my 998s open pipe set up! I does still work, well did until i replaced it........
Henners may be able to advise what was done with his 996......