Quote:
Originally posted by Real McCoy
My clutch has just started slipping, before i take the plates out and see if the can be de glazed, i wonderd if anyone had any advice or tips on what to do  |
Getting back to the original request, it's a doddle cleaning a clutch, all you need is a few allen keys and if possible one of those proper magnetic thingies to dig out lost nuts etc (you know what I mean)
Just take the cover off, then remove the 6 bolts holding the springs in place, then remove the pressure plate (more than likely it'll pull the pushrod with it, just be careful not to nick the o-rings on the pushrod.
Then it's a case of pulling the friction and steel plates out making sure you keep the clutch pack in the same order (this is where the magnetic tool comes in handy) clean the plates and refit