Ducati Sporting Club UK - View Single Post

moto748 · 14-Sep-2005, 13:30

My paddock stand has a "shoulder" on the stub-shaft, so the first 1 1/2" of shaft is about 3/4" in diameter. The rest is 1" diameter. The shaft needs to pushed fully home so that the 1" diameter section is fully engaged.

Hope this is clear.

14-Sep-2005, 13:30	#3
moto748 Registered Forum User Big Twin Posts: 1,385 Join Date: Apr 2004 My paddock stand has a "shoulder" on the stub-shaft, so the first 1 1/2" of shaft is about 3/4" in diameter. The rest is 1" diameter. The shaft needs to pushed fully home so that the 1" diameter section is fully engaged. Hope this is clear. Reply