Quote:
Originally posted by HW
I've just had a PC3 installed and it's velcroed on the outside of the battery. I don't currently use the bottom fairing bolt because both sides of the mounting have broken, instead using a tiewrap through 2 holes drilled further back (about 6" back, so I can get the tiewrap in).
It looks like the PC3 is forcing the fairing panel out so the 2 halves don't meet at the front. Need to investigate further, but if you have a PC3 where is yours mounted? |
That's where the instructions that come with PCIII say it should be mounted. However, when I fitted mine I couldn't get the fairing to meet either. I made my own ally bracket that sits just above the battery.
I think JHP must lengthen the wire that connects to the battery when they fit it on the RH side. It looks like the best solution though.