| FLYWHEEL NUTS
Just refitted annettes flywheel,(thanks to craig at ducati london south for his advice) and thought I should post the new reccomended torques. On engines with a solid countershaft drive gear(the gear behind the flywheel assy) ducati now reccomend 270 newton metres, on SP/SPS and posibly some rs the countershaft drive gear is grooved where it sits on the crankshaft, this type of gear can only be torqued to 190 newton metres otherwise the gear can shatter.
naturally I tightened to 270then had to strip it again and check the sprocet so I could retighten it to 190, to check for the oil groove you have to pull the gear off.
dave
ps I used semipermanent loctite as well!! |