Ducati Sporting Club UK - View Single Post

iang · 18-Oct-2005, 21:02

HW, cheers you have confirmed that I have it in the correct way, the bit that you cannot see ( wheel side ) is about 20 mm wide which is inside the bearing and the fork side is about 4 mm.

Thanks Again

18-Oct-2005, 21:02	#3
iang Registered Forum User Big Twin Posts: 1,170 Join Date: Jan 2003 Location: northumberland HW, cheers you have confirmed that I have it in the correct way, the bit that you cannot see ( wheel side ) is about 20 mm wide which is inside the bearing and the fork side is about 4 mm. Thanks Again Reply