| I have thought about making one myself before now, the small brembo mastercylinder only costs £28 add a good forkleg/steering damper clamp for aound £22. make up an adapter bracket to bring the two together, then its a case os adding a lever and pivot.
All quite possible here in the workshop at work, but as I have no issues with the standard ones on the 998 or 996 which I do use at times to compensate for a lack of engine braking due to both having slipper clutches, I haven't tried to put one together.
It would be even easier if I use the other Brembo rear mastercylinder that I have as it already has a pivot point as part of the casting.
in my opinion for what they are most prices quoted are over the top |