| Thanks once again, Shazaam. Just two questions:
Eccentric Position
I thought the "recommended" eccentric position was 6 or 7 o'clock - can you confirm 4 to 5 o'clock is the correct setting?
Chain Pitches
Am I right in interpreting from your list that a 14T front sprocket should only be used with a 520 chain? I use a 14T with a 525, so:
a) Is that a real problem?
b) Do the same chain lengths apply for 14T/525 as 14T/520, as outlined in your post? If not, could you please advise me of them?
Thanks in anticipation.
[Edited on 1-9-2003 by 998Addict] |