| The part number for the pressure plate is the same as used in the 998RS02 and RS03. Do you have part number of the internals, i.e. the clutch drum, basket, and flange (back plate)?
By the way the order shown in the exploded diagram in the RS manual is (from inside to outside):
6-8-6-7-6-8-6-7-6-8-6-7-6-8-6-7-6-7
where:
6 is friction plate
7 is 1.5 mm flat steel plate
8 is dished plate
Remember, though, that this is just a starting point and the make-up to the clutch pack ideal for your back may vary depending on tolerances, etc. |