Quote:
Originally posted by dave996
How do I remove the hub and all the bushes/bearings from the swingarm 
Cheers |
The hub is pretty easy to take out. Remove the big circlip that holds the rear caliper hanger in place, slde that off with the two washers and o-rings, make sure the hub is free to turn and tap it out of the swingarm.
None of the bearings are easy to remove and check. If yo remove them, you'll more than likely bugger them.
Check them in situ, grease them and you should be OK.
They aren't cheap, so taking them out for the sake of it will be an expensive job.