Deceased 02/10/2010 - R.I.P.
Ducati Corse
Posts: 3,170
Join Date: Feb 2002
Location: Darlington, Co. Durham
Mood: NGRRC Minitwins champion 2007
Butch...I'd be interested in those clocks if you want shot of them for a price.
I've made some small progress on this - I've removed all the dc motors from the panel, all the mounts etc and have built a small loom extension & tested it ok. The next step is to re-house the pcb in a suitable enclose from Maplins or RS. Once that is working I will be able to relocate it under the seat out of harm's way so, at least the bike can be used.
The next step after that is to obtain a cct diagram to try to find whether or not the panel can be jumpered out of the circuit.
I also plan to test it on the new 800 to verify whether or not panels can be interchanged between the bikes.