Quote:
Originally posted by tebby
Well loosened the chain to 50mm free play when the bikes on the centre stand, interestingly with a pillion on board when I reached down to check,the free play was still only about 5mm.I wonder if this is enough!?
vibration has improved maybe 20% but still there.
When I adjusted the chain, the wheel as returned from the dealer after a smaller frtont sproket had been fitted & engine tuned, still squeaked.
The dealer had said to ignore the swing arm graduations & that they used a laser to line up the wheel.
When I checked the graduations, they were exactly the same measurement from the back of the swingarm on each side. I measured the rear of the axle to the rear of the swingarm & re adjusted & the squeak vanished! |
Has anyone else used a laserline to align the back wheel, Im sure they are cheap enough from B & Q ?