Quote:
Originally posted by Tonio600
Quote: Message original : skidlids
Check the connections on the start solinoid aren't touching against the cylinder head.
If all OK there get a set of jump leads run one from the -Ve of the battery to s good engine earth, I find exhaust studs work well.
Then with the other jump lead connected to the battery +Ve prod the other end on to the starter motor connection, if you still only get half a turn I would suspect the starter motor but could also be a problem with the engine |
Where is the starter motor connection? |
Tonio its under the starter motor, A rubber boot usually full of rust, you cant miss it.
Glyn