Forgot to mention this one but, since I've been trying to clean out my hard drive I stumbled across the digi-pic I took to help me out if I forgot what I was doing.....
I didnt like the coils pointing straight down as the HT cable routing was bending to tight through 180° so...... I tried turning the coils upside down without too many problems.
I think there was only one cable that needed extending. Just remembered the real reason for having to do all this.....the massively thick HT leads I had been able to get hold of WOULD NOT screw into the port on the coils, so I ended up cutting the port down to size.
A nice upgrade I think would be to fit Dyna coils, these point outwards at an angle from the coil body and apparently, provide huge sparks as well - time will tell
Regards - Frank
[Edited on 22-9-2003 by Iconic944ss]