| Ben....
....what are you trying to achieve with the change of ride height?
I assume you want to raise it to increase turn-in speed?
If so, I wouldn't initially worry too much about what measurement the ride height actually is at this stage, (unless its way out), but just try rotating the tie bar a couple of turns to raise the rideheight and see how that feels.
If it feels better - then thats great, if not keep trying it!!
If the fast turn in is preffered, you can then look at changing the rake angle at the front end.
The ride height adjustment is pretty easy, just remember that one of the ends of the tie bar has a reverse thread, get yourself a couple of spanners and your sorted!!!
Just remember to count how many turns you make so you can always put it back afterwards.
Good luck.
Tim |