| Harv ,If you do that you must switch the meter to AC. You can get up to 110v AC (thats for bikes after 1999 Before that its 130v . Tap into one of the Yellow wires with the meter (Pos) and earth the other Neg from meter onto the bike frame . Should get some reading if its working. Plug your tester on Onms plug into the yellow wires and it should be inbetween 02-04 ohms Electrics are the arse to fathom some times. Because you may need the battery off to get at the wires you may have to rig an extension from the battery to the main battery cables.
[Edited on 15-4-2006 by Fordie] |