Quote:
Originally posted by andyb
Quote: Originally posted by Jon
I believe it should be more or less the same has a Bucci or other make of clutch. You must start the pack seqence with a friction plate first then a dished plate ( dot towards you, friction pressure friction. The last pressure plate should have the dot facing in towards the pack. 36mm sounds right conserning the pack thickness, most I believe would measure the distance of the last pressure plate to the edge of the basket 4.5mm |
that 4.5mm bit...isnt that for a normal (proper) 6 post slipper.....is it the same? |
My STM is a normal (proper) slipper clutch!!
Jon, when you say pressure, you mean a plain steel plate right?