[spinoli1]

Hi Iain,

It's been a while but going from memory:

The rim of the "top hat" collard spacer is toward the outside.
The dished washer replaces a similar standard item
Torque for big nut - lots, have a look in the Haynes. You'll need a clutch holding tool which you can make from 2 old friction plates and a piece of aluminium.

The Casoli kit is not hard anodized so:

Make sure the bearing ramps are lightly greased about evey 1,000 miles
Use alloy friction plates, or the basket gets real beating.

The attached diagramm may be helpful:

All the best,

Spin