[tranquil_rage]

I'm going to have to strip my carbs as its ****ing fuel out of the overflow after I give it a hard blt adn then stop. I think its down to needle seating or the float control. Either way a good clean and overhaul should do the trick.

Now as I will have the *******s apart I thought it would be an excellent time to fit the dynojet kit. However I wont have replaced my exhausts by then. I will have a K&N filter.

I want to know if this will foul the engine not having an aftermarket exhaust system when paired with a K&N and a dynojet kit.