Thread: New Drive line
View Single Post
Old 21-May-2006, 19:43   #4
TopiToo TopiToo is offline
Registered Forum User
Ducati Meccanica
Bikes: 748ish . .
 
Posts: 2,121
Join Date: Sep 2001
Location: SW Londinium
Mood: Sampai jumpa lagi
Hello Rick

just finished this job myself, as andyb says undo the big nut first,
I also put the bike in first gear, helps stop the wheel spinning.

If you have a Haynes its all straight forward.

good luck . .

regards

TopiToo
Reply