| 916 wiring - help needed
Hi all, just fitted a new loom to my old 95 916
the loom is from a slightly later bike still with 2 wire gene system.
Things missing are the balast resistor (strada only i believe) and a earth lead to the rectifier.
Here is a pic, can anyone confirm that the rectifier block connector is correct ? i cant see any other way of fitting it
The 2 yellows are cut short on the rectifier, new ones will be soldered to reach the bullets from the gene itself
then its just fit both earths to the bat and the live and starter feed
Would appreciate some advice before i connect it up live and see a thin blue flame running around my poor 916
Cheers
Last edited by crm250 : 02-Sep-2006 at 13:21. |