| Andy, your hose seems to have a different fitting on the master cylinder to the one I got, I was initially going to route the hose near the gearchange side as per original but the 90deg fitting that came with the new hose hit the frame meaning that it had to be routed the exhaust side of the frame.
I was going to route the hose like yours but found that if I used the original rubber hose clip on the inside of the swinging arm and a tie wrap either on the hugger or the caliper bracket the hose was miles away from the wheel/disc/tyre so I just left it as standard.
Got some more bits arriving this week and another set of Diablo Corsa 3s even though I said that I would not spend any more !!! Addictive or what ? |