Quote:
| Originally Posted by antonye And this is the circuit you need ... I'm sure you'll be able to figure it out  http://www.montage.co.nz/led/images/LED_CircuitPlan.gif Ps: a = anode, k = cathode; check the spec sheet of the IR device to see which is which! The problem with IR is that you can't see if it works - obviously, normal LEDs are much easier!! |
Thanks Ant - You're a star mate.
I did do this kind of stuff at school in technology (or whatever it was called) so I'm not a total muppet, but it was a looooooooooooooooooong time ago.
Cheers
