| As you can see there are only four friction in the pisture. Now most have a round eight so its not a very good picture.
On my stm slipper i ran 4 dished plates. incidently jhp said you should run the dished ones in pairs seperated by a friction and in the shape as if you are cupping your hands together. One pair after the first 2mm, then the last at the very end but one friction and plain. after this you can put as many plain in to get your 4-5mm gap.
still doesnt answer my problem though.
im toying with the haynes set up for a sp.
bloody hell!! |