Registered Forum User
Ducati Meccanica
Posts: 2,527
Join Date: Sep 2004
Location: Pulborough, W. Sussex
Mood: 900,900,851,750,750,750, 600,600,450,350,350,250
fiscus is right about the voltage spec - 230Vac is pan-european now.
Check the spec on your valves : 230V is 220V + 4.5%
and ... you dont say how much power they consume - which is a rather important factor if you want to drive them through any kind of intermediate device. Almost everything you put in the way will get hotter than you would like, especially if its cheap far-eastern stuff, as their manufacturing policy seems to be to see what they can get away with, and then charge you an arm when you come back with a tighter (reasonable) spec.