Quote:
| Originally Posted by Rob B I bought some gear in Thailand and just plugged it in. I don't think you'll find you have any issues as long as the amp power supplies can cope with the regulation of the slightly higher seconadary voltage it may see.
I did have to set /reset the zero bais of the poweramp stage but they where a class a/b set up where the valves did the front end and the mosfets drove the power stage |
Rob, that's reassuring...I'm sure I could get away with a 240 volt supply, but I'm not sure how an increased supply would affect the plate voltages on the output tubes (which I think run at about 12-1400 volts)...I just reckon caution is justified (although not so much caution as not buying the things in the first place!)