| Seeking Electrical Guru
I am about to get cutting into a 916 Bip loom (it's also fitted to a number of other bikes with the 1.6m ecu) and wanted to check my thinking on a number of the engine management circuits and the way that the Fuel pump/level sensor works. Pretty low level stuff but it'd nice to be 100% sure. Also trying to find out what the small 2 way connector is used for in the seat/ tank area. Can't find any mention of it on the wiring diagrams. Both wires are Brown with white traces. It breaks from the main loom near the relays that live under the seat unit.
As you can guess, I don't have a 916 handy.
Regards,
Rob |