I wish I'd taken some photo's myself but my skill just aint up to the mark really.
The post that started it all on Ducati.ms
http://www.ducati.ms/ubbthreads/showthreaded.php?Cat=&Board=supersport&Number=1960 21&page=0&view=collapsed&sb=5&o=0&fpart= in the last pic shows the clamps at the rear that hold the fuel pump in place.
A short piece of hose comes from the front of the pump, into the filter and then the filter connects to the outlet of the tank and the fuel tap with a 2nd short hose.
At the top of this post here is a pic of the METAL bodied filter I've zip-tied to my breather hose - I'll check but I think the hose is just 6mm petrol.
I'll try and get the number for the metal bodied filter as well as the one inside my tank as OEM is plastic.
Worthwhile mod in my book - especially with the POR liner overhaul as well.
Maybe I should start my own tank refurbish centre
Cheers - Frank