Quote:
| Originally Posted by 851neil I guessed you must just be running the single injector from the pressure setting. Are you planning to upgrade the tb's and go to 4 injectors or is it a case of suck and see how she goes ?
Only reason I ask is that at lower revs with higher fuel pressure settings I would have thought that you would see poor atomisation leading to rough running in the lower rev range. |
i did think of that, but hopefully getting it dynoed and having the PCIII set up in conjunction with the FIM ultimap chip we can sort it. from my one ride on a sp5 (admitedly it's been my only ride on a 4 injector bike) it ran rough as **** down low anyway. i also have the facility to map the cylinders individually, so i'm hoping there is enough adjustability to set it up just right.