View Single Post
  #11  
Old 10-Nov-2006, 09:37
Paul James's Avatar
DSC Member Paul James Paul James is offline
Founder Member
Ducati Meccanica
 
Posts: 2,994
Join Date: May 2001
Quote:
Originally Posted by doogalman
This was last winters project. Had promised myself since 1978 that i would build one after i turned one down for £160.
Most of the bits are from auto jumbles , ebay and hunting down. The motor is a 650 tr6 in standard trim. As i wanted to run standard for a while before i start to do any work on the motor. It runs ok has led the Surrey bimble run. is great run to ride. The onle things i didn't do on it as i farmed it out, were lacing the rims and paintwork.
Have built a dozen or so bikes over the years , but this one is for me to keep. Normally i get fed up and sell it after a while of use.One of the other interesting ones i built was a tuned xbr500 lump in a tzr125 deltabox frame, but that is another tale.

Be interested to hear what you do to the motor if you decide to "breathe" on it a bit ! I've got a couple of spare kickstart return springs knocking about somewhere if you ever break yours, they did seem a bit prone to breaking. We also devised a method of stopping the pushrod tubes from leaking oil. I know of the whereabouts of a Triton and once I've made space in the garage by selling the ST2 it could well be in there as a winter project.


http://www.multirole-eng.com

http://www.audicator.com Check out our simple to fit, potentially life saving turn signal alert system.
Quote+Reply