Registered Forum User
Big Twin
Bikes: 916SPS Ratbike + 749R Shed
Posts: 1,030
Join Date: Jun 2001
Location: West Sussex
Mood: Ugly girls (749) are more dirty.....
I had this on my 748 - bearing replaced, seals replaced, cylinder replaced....it still didn't cure it!
Then..fitted a bleed banjo bolt at handlebar end and that cured it! Basically it's a pain getting air out of the line at the handlebar end if you haven't got a nipple there like on the later (brake) cylinders. Installing a Goodridge bleed bolt allows the air to be bled once and for all....IMHO.
R X