Ducati Sporting Club UK - View Single Post

Shazaam! · 16-Jan-2004, 18:50

Here’s what I did.

Use a Dremel and a cut-off wheel tool to cut slots into the foot pegs. Leave the edges sharp.

http://home.san.rr.com/shazaam/Non-SlipPeg.jpg

16-Jan-2004, 18:50	#3
Shazaam! DSC Club Member Big Twin Posts: 1,167 Join Date: Nov 2001 Location: San Diego, CA Here’s what I did. Use a Dremel and a cut-off wheel tool to cut slots into the foot pegs. Leave the edges sharp. http://home.san.rr.com/shazaam/Non-SlipPeg.jpg Reply