Quote:
| Originally Posted by cl0nd0n Other option is I have heard that Triumph ones are the same as Ducati ones. Anyone had experience of these?
Cheers again. |
Here's a posting on the Triumph fittings:
Triumph motorcycle part # T1241279 red anodized, T1241270 clear anodized. About $5 each. They come with clamps.
Two problems with these.
1. These do not have a closed center. (check valve in the fitting)
Should it come loose it will pee fuel all over your nice hot engine.
2. They WILL NOT press into your existing duc fuel lines. You will need four feet of 3/8 diameter fuel line to replace the OEM hose. Be sure to get the good hose clamps that clamp 360 degrees around the hose. These are for the fuel block end under the airbox. Normal hose clamps will cut into the hose. Old Fart