| Carby 900ss - DIY hi-rise bars etc.
Almost a full day yesterday and even managed a bit today in prep for Cadwell and hopefully the rest of the year......
So....M&P accessories sell a hi-rise conversion that I reckoned would work on my bike - but I was not 100% sure - time to use the 'suck-it-and-see' formula.
I think its gonna work out OK.....the only slight problem is that the bottom clamp onto the fork top is deeper than I thought. Which means I've had to drop the forks further through the clamps than I indended from my calculated standard of 21mm to 25mm. The handle bar position is only about 1" higher and 1" further back but combined with all the other mods - I'm starting to get worried on the handling effects........time will tell !!!!
Continues on other posts here..... |