| A little more TI porn!
Same heads that Sharpy has used on his rear caliper but used on the front ones intead.
By the way, if you want to use these TI flnged bolts on your front calipers you will need to trim the flange very slightly to 16 mm dia & also trim down a 12 mm socket so that the O/D is 16 mm to match the flange on the bolt.
Things of beauty: Ducati 998s Mono: BSA DBD34: Vincent Black Shadow: Manx Norton: 1983 Laverda Jota: Matchles G50: Me! |