| On the 600Ss when doing away with the front harness the main wires of note that need to be used for the bike to run are
Red/Blue = Starter Solinoid
Brown = Feed to Coils
Red/Black = Feed to Fuel pump
With the Red carrying he 12 Volt from the battery going to the ON/OFF switch then out the otherside to a in line fuse and then connecting to the RED/White, this then splits into two (3 if using a electronic Tacho) with one going to the Red/Black of the fuel pump and the other to the Righthand switch gear on the non common side of the kill switch.
So that when you turn the switch to the run position it puts 12V onto the brown for the coils and also onto the start button, on the otherside of the start button it should go to the Red/blue for the starter solinoid
Checkout the Desmo Due Paddock on Facebook |