Quote:
| Originally Posted by chris.p Shazaam, are you saying that the rear of the bike must be "topped out" i.e. lifted so that there is no static sag???? when you measure from the centre of the wheel nut to the top edge of the tool??? Chris  |
The extended reading is ideally taken with the rear wheel lifted off the floor, not that easy to do with just one helper.
The figure I use is 242mm fully extended and 232mm with unloaded sag. I did try the 245mm extended with 10mm of sag that was recomended to me by a couple of SoT runners (one won the Superclub championship and the other was runner up in the Bemsee championship). but prefered it a bit lower, maybe my front rideheight is also a bit lower than theirs.