Registered Forum User
Bikes: Mostro S4 - Superbike 916
Posts: 36
Join Date: Mar 2011
Location: France
Yes, if you have pictures of these spacers, I'm interested in.
The base project is a 916 Bipo so 1.6M and loom.But to build the 955, engine basis is a 916SP crankcases, crankshaft and heads.
I have a P8 and dual injectors TB but won't use them for this bike. No interest for this config, I though.
And for the ECU settings, a PC III USB would be my first solution (already worked with on my TL1000R). Just to find one.
But I've seen that Kamna can set Duc' ECU up also... In progress.