[skidlids]

If it was my bike I Would still rather dump the extra 1.5mm Steel and change 3 of the other 1.5mm plates to 2mm, you have the same overall pack thickness


This is how I see it

Lets assume a clutch lift of 3.8mm
Your setup had 19 plates so thats 3.8mm/19 = 0.2mm gap per plate

I would rather have 18 plates so that you get 3.8mm/18 = 0.21mm gap per plate

Might not sound a lot but that extra 0.18mm of clearance across the pack can help reduce drag and the risk of cooking the clutch