View Single Post
  #1  
Old 04-Oct-2011, 16:51
Harv748's Avatar
Harv748 Harv748 is offline
Registered Forum User
Big Twin
 
Posts: 1,882
Join Date: May 2002
Cool 916SP...price reduced

OK, it really must go now...either on here or good 'ol ebay. It will be a shame, but a nipper on the way means it needs to finally make room!

This has be half-heartedly advertised by me a couple of times on here by me...the fact was I just didn't want to let it go...but the time has now come, she has to find a new home as I'm just not riding it enough and I need the cash for other projects!!!

Since last being advertised, I have taken it out of storage and have had it serviced (filters, oil, new belts, fluids etc...and had the rockers checked and one replaced only a few hundred miles ago). I rode it about 50 miles this year!

In the last five years I have done a couple of hundred miles on this bike, and can't justify having it tucked away under a blanket in storage for most of the year...its time to let it go.

List of bits and bobs:

1995 DUCATI 916SP(3)

THE BIKE:

MAGNESIUM 5 SPOKE MARCHESINI'S
PIRELLI DIABLOS USED FOR APPROX 500 MILES
OHLINS FORKS
OHLINS REAR SHOCK
OHLINS STEERING DAMPER

BREMBO 4 PAD (P4) CALIPERS
BREMBO RADIAL BRAKE MASTER CYLINDER
996R DISCS

WSB EVO SLIPPER CLUTCH
BREMBO RADIAL CLUTCH MASTER CYLINDER
JHP LIGHWEIGHT CLUTCH SLAVE CYLINDER
TEC-MOTO BILLET OPEN COVER

DUCATI PERFORMANCE BILLET REARSETS
CARBON FRONT MUDGUARD
CARBON CORSA HEEL GUARDS
CARBON SEAT TRAY
CARBON AIR TUBES
CARBON AIRBOX
CARBON V PIECE
CARBON SHOCK GUARD
CARBON SPROCKET GAURD
CARBON CHAIN GUARD
COLOUR CODED MIRRORS

50MM TERMIS
FIM PROGRAMABLE PERFORMANCE CHIP SPECIFIC FOR 916SP
INLINE TUBE PERFORMANCE FILTERS
OR (AS I HAVE BOTH)
JHP PERFORMANCE CHIP FOR 916SP


TITANIUM GEAR LEVER PIVOT BOLT
TITANIUM REAR BRAKE LEVER PIVOT BOLT
TITANIUM FRONT AND BOTH REAR WHEEL NUTS
GOLD DID HEAVY DUTY X RING CHAIN
DIGI-GEAR INDICATOR
BILLET RIDE HEIGHT ADJUSTER
EVOLUTIONIZE NUMBERPLATE TIDY
MRA PERFORMNCE SCREEN
JHP FORK PROTECTORS
GEL TYPE BATTERY
ORIGINAL PADDOCK STAND
ORIGINAL COVER

I ALSO HAVE AVAILABLE SOME OF THE STANDARD PARTS
AIRBOX AND TUBES
STANDARD CANS AND CHIP

I’M SURE THERE IS OTHER STUFF…BUT I CAN’T REMEMBER RIGHT NOW!!!

As many of you are aware I stripped the bike to the frame over the 2005 winter and cleaned it to within an inch of its life! Any parts that were a little furry or not looking good were replaced (even the bit of tin foil on the crankcase breather!!!!!).

Since buying the bike from a fellow DSC member about 7 years ago, it has been worked on and upgraded extensively.

The bike turns heads wherever it goes...

£6350...sensible offers now considered.

If your interested please drop me a pm. If your not, please show some respect and don't ruin this add with negative comments...many thanks.

More pics available if need be...viewings welcome.
Attached Images
File Type: jpg bike1.jpg (145.0 KB, 206 views)
File Type: jpg rebuilt.jpg (79.4 KB, 153 views)
Quote+Reply