NOW SOLD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Removed from my 996
Pair of PFM 6-Pot calipers with recent pads
Calipers use the same pads as the AP Lockheed 6-pots
Calipers have a 40mm mounting so are a direct fit to many pre 1999 Ducatis
Pair or PFM Narrow Track race discs, minimal wear and measure 6mm in thickness, these use a T-Groove system similar to some of the later race Brembo Discs and use a very large circlip to hold the Steel Disc to the Alloy carrier
As they are Narrow track race discs they offer a weight saving over the original Ducati discs saving on both Unsprung mass and gyroscopic forces
Centre boss is 64mm diameter with the 6 mounting holes suitable for a 8mm bolt on a 80mm PCD
Goodridge coated Brake Lines, these are the ones that came with the calipers (Not those in the picture) and have the T- off low down so they fit in the clip on the front mudguard just like the originals so ARE NOT Suitable for Racing
£465 + Postage
Collection OK or possibly meet up somewhere
email
skidlids@ntlworld.com Tel. 07956 271131