| Can\'t get the hub nut off!!!
That's a good start - 41mm socket, torque wrench, other half sitting on the bike with the brakes on and all that happened was my eyes watered and the back wheel lifted off the floor!!!
Methinks that might be just a little on the tight side!
Had a peek doen the back of the carrier though an it looks like on of the cush bushes is moving out of the back. It's not touching the chain adjuster ring yet, but only has about a 1mm gap at the moment...
Will it stay put for a while or is this an immediate replacement situation? Is there a way of coaxing it back into the carrier?
Any ideas on getting the hub nut off - I might just have to jump on the torque wrench...!!!!
Giles |